makemachine.ai
DB

DIY BBQ Temperature Controller

A temperature controller for charcoal grills and smokers that makers can build themselves. A pit probe, two meat probes and a small fan on the bottom vent hold the grill at a set temperature for long cooks, with lid detection and a safe stop when a probe fails. The project started because people search for it, and it grows step by step with the interest it gets.

Open hardware, CERN-OHL-W 2.0

Project log: 6 updates as text

Presentation v1.0

DIY BBQ Temperature Controller, Presentation v1.0: Product video: from the whole grill to the control box (rendering, not yet built)

A 12-slide presentation of the DIY BBQ Temperature Controller, with a title picture, four picture cards for phones and a 10-second product video. It goes from the maker's problem (a long charcoal cook needs someone to keep adjusting the vents) to the solution: a small fan on the bottom vent with a flap that closes when the fan stops, a control box in the shade with one pit and two meat probes, and adapters for kamado, bullet smoker, kettle and offset grills. All pictures are new renderings of the current CAD model with real-world materials. Nothing has been built or tested yet, and the …

  • 12 slides from problem to next steps, as PDF and PowerPoint
  • New product renderings: kamado set, control box, fan head and all four vent adapters
  • 10-second portrait video: the camera moves from the whole grill to the control box
  • One fan head fits kamado, bullet smoker, kettle and offset through adapters with a common 40 mm spigot, no drilling

Sourcing v1.0

One device of the DIY BBQ temperature controller costs about 208 EUR as a kamado set and about 251 EUR as a kettle set. The price includes the assembled control board and 19 % VAT; shipping and import duties are not included. About 44 % of the kamado total was read on supplier pages on 10 November 2026; most of the rest is an estimate or not yet re-checked. The main open question is whether the tube parts are bought as full stock lengths (the design assumes so), which adds about 70 EUR. Nothing has been ordered.

  • Per device: kamado set 208 EUR, kettle set 251 EUR (incl. VAT, incl. board, no shipping).
  • 44 % of the kamado total is a price read on the supplier's page today; 18 % is an estimate; the rest is from earlier sources.
  • Volume prices help: at 100 devices the kamado set falls to about 199 EUR per device (blowers, probe jacks and DC jack have volume breaks; the board does not).
  • Control board: about 60 EUR per assembled board from the JLCPCB quote for five boards; the parts price is still provisional.

Electronics (PCB) v1.0

DIY BBQ Temperature Controller, Electronics (PCB) v1.0: Controller board, front: display side

The controller board for the DIY BBQ temperature controller is designed and ready for quotes: a 100 × 75 mm two-layer board with an ESP32-C3 Wi-Fi module, three probe inputs measured ratiometrically with a 16-bit converter, a 12 V blower driver, and power from a 12 V adapter or a USB-C power bank. All seven design checks pass, including zero layout errors and zero open connections, and every one of the 50 parts lines is in stock for assembly. The blower runs on a variable DC voltage instead of a switched supply, because the fan makers' datasheets forbid supply PWM, and two independent …

  • 100 × 75 mm, 2 layers, 125 parts on both sides; probe jacks, USB-C and 12 V jack face down out of the box
  • 3 probe inputs: 16-bit ratiometric measurement, filters and ESD protection on every jack
  • Blower speed by variable DC voltage (3.8–11.4 V) with tach and current sense, two independent off-switches
  • Power from a 12 V adapter or a USB-C power bank that offers 12 V; the same port updates the firmware

Mechanical CAD v1.0

DIY BBQ Temperature Controller, Mechanical CAD v1.0: Kamado set: fan head on the draft door, control box on the table rail

The mechanical design of the DIY BBQ temperature controller is a complete parametric CAD model at maturity stage 2 of 4 (layout design), revised after a second independent review. It has a sealed control box with all connectors facing down, two fan heads with a gravity flap that closes when the fan stops, and adapters for kamado, bullet smoker, kettle and offset grills, all joined by one 40 mm spigot. This round fixed the open review points. The flap is guided closer in its slot and is slightly narrower, so it now clears the bore by 1.12 mm. With the fan off, no air leaks past the closed …

  • Gravity flap in a stainless cartridge: closes by its own weight, opens at 18.3 Pa, 1.12 mm from the bore when open
  • With the fan off, nothing leaks past the closed flap at nominal size: slot cover and pin ends sealed with heat-proof silicone
  • One 40 mm spigot on every adapter; the fan head pushes on with a silicone coupler
  • 0 collisions in 29 checked states (12,066 part pairs)

Research v1.0

We checked which search phrases people actually type around DIY BBQ and smoker temperature control. Two phrases from the brief are weak: "bbq machine design" is completed by search engines as "bbq grill design", and "grilling equipment for developers" gets no suggestions at all. The strongest search families are DIY smoker temperature controller, kamado temperature controller and PID smoker controller, and the kamado topic has few build guides in the results. We propose a six-step plan that grows from our existing article into a charcoal hub page, PID tuning, probe calibration and kamado fan …

  • Lead with "bbq grill design" and "diy smoker temperature controller"; "bbq machine design" leads searchers to grill design and shopping pages.
  • "grilling equipment for developers" gets no search suggestions; at most it works as a tagline.
  • Kamado temperature control: strong demand, mostly shopping pages, few build guides. This is the biggest gap.
  • PID for charcoal and probe calibration with the Steinhart-Hart equation are strong follow-ups; calibration suits the developer audience.

Concept v1.0

DIY BBQ Temperature Controller, Concept v1.0: The three options step by step (animation)

Three ways to build a do-it-yourself fan controller for charcoal kettles, kamados and small offsets were worked out; all three share the same probes, electronics and control loop and differ only in how air reaches the fire. Recommendation: Option 1 "Gravity flap": a small 12 V blower on the bottom vent pushes a light flap open, and the flap falls shut whenever the fan stops, so every fault, even a power cut, ends with less air. The loop ramps the set point slowly, pauses the fan when the lid opens, switches it off when the pit probe fails and raises an alarm when the fire dies; in a simple …

  • Recommended: Option 1 Gravity flap. The blower sits on the vent, and a flap closes by gravity when the fan stops.
  • One core for all options: three standard NTC probes, Wi-Fi controller with local web page and cook log, 12 V adapter or USB-C power bank.
  • Loop: slow set-point ramp with capped fan at start, fan pause on lid opening, fan off on pit-probe fault, fire-low and fire-out alarms.
  • Illustrative model: no start-up overshoot (+0.9 K instead of +32 K), but about one hour to reach 120 °C.